Brother Printer Error Code 0b
If there is a mechanical malfunction of the Brother Printer device, an Error Code 0b occurs. To fix this error code you need to check that the machine is plugged straight into a wall outlet. You need to unplug everything including the power, phone and communication cable. Now, let the machine sit unplugged for 30 to 60 minutes. Now, plug it again and make sure that it is plugged into a wall outlet and also make sure that it is properly grounded. If this process is not working, then you can obtain Brother Printer Support by sitting at your home.
Brother’s tech-specialist will deal with your problem and provide you the best possible solution. Brother strongly recommends that customers use only Genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are match exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner.
- Press and hold down the power key to turn the machine off.
2. Unplug the power cord from the back of the machine.
3. Wait approximately 30 seconds. Plug the power cord back into the machine.
4. Press and hold down the power key to turn the machine on.
- If the machine displays 'Ready', the issue is resolved.
But if the message ‘Print Unable 0B’ still appears on your machine’s display, we recommend you to replace the drum unit in the machine (DR221CL). After replacing the drum unit, if the message still appears and your machine is within warranty, you can locate a Brother Authorized Service Center (ASC) in your area by clicking on the official link. If your machine is out of warranty, you can locate a Brother Authorized Service Center.