Canon MX922 Error Code B200


Canon MX922 Error Code B200


Canon printers are known for their excellent features and high performance. However, you often encounter some problems associated with it. The Canon MX922 B200 error is a common problem with printheads with your Canon printers. The Canon MX922 printer also suffers from this error code. Are you facing the same problem and want to know how to fix the B200 error code of the Canon MX922 printer? Contact our team of expert professionals as soon as possible. Our support team can help you solve this problem and provide you with reliable online support.

The Canon MX922 b200 printer error code or “A service error has occurred” is one of the most common issues faced by Canon printer users. The procedure for correcting the Canon MX922 b200 printer error code is very similar to the process for correcting the Canon b200 printer error code. The difference lies only in the number of cartridges inside the printer and its configuration. Canon printers mainly affected by this error are Canon mp550, Canon mg5320, Canon mx870, Canon mp620 and other Canon Prixma multifunction devices.

Causes Of Canon MX922 B200 Error

  • This can be caused by the print head of the Canon printer
  • Canon Wireless Printer Driver Does Not Install Properly
  • This error code may be displayed due to insufficient ink in the ink cartridge or problems with a paper jam.
  • Overheating problems due to inexpensive refill cartridges
  • Are you faced with any of the problems mentioned above? Connect with our certified technicians and enjoy our incredible services at an affordable price.

Canon MX922 Error Code B200

How To Fix Error Code B200 Canon MX922

Solution 1:

  1. Remove and clean your print head
  2. Clean the printhead connectors with tail tips and alcohol.
  3. Before turning on your printer, make sure the connectors are completely dry.
  4. Quickly press the power button to start the printer restart mode.

Solution 2:

  1. Reset your print head turn off your printer and leave it off for a few minutes. turn on your printer and see if the problem is resolved

Solution 3:

  1. Turn off the printer
  2. Open the print head
  3. turn on the printer
  4. The cartridges will begin to move to the left. Before the cartridges reach the left side, close the printer cover and leave it on.

Solution 4:

  1. Remove all ink cartridges
  2. Lift the gray bar where the ink goes
  3. Leave the print head in the center of the printer while the printer was off.
  4. Clean the plastic finishes / cleaners themselves on the printer

Solution 5:

  1. Replace the problematic cartridge
  2. Check your printer manually when you want to replace the cartridge

Solution 6:

  1. Check for the obstruction
  2. You must turn off your printer
  3. Remove the paper and check that there is no obstruction