Epson Error Code 0x60

It's all about the Tech Work

Epson Error Code 0x60

Epson Error Code 0x60

 

 

Contact Support

Typically, Epson users encounter an error called Epson error code 0x60 or 60H. When your printer has sensor problems, this error is displayed. These sensors are also called PW sensors. You will find them attached to the printers. Some models of Epson are vulnerable to this error, such as B-500, B-300, B-508DN, B-308, B-518DN, B-310N, B-318N, B-510DN. However, before you panic and find an Epson printer repair service provider, you can try to repair this error yourself. From organizations to individuals, they specialize in the catering needs of all types of consumers. However, sometimes these gadgets can also collapse. Regular use, component failures, etc. may be the reason for problems with your printer, including error codes.

Epson Error Code 0x60

Steps to Fix Epson Error Code 0x60

Step 1: Clean the sensor

First, you need to clean the sensor part with cotton. Moisten it a little then apply it on the sensor. If you can not find it, you can find the exact location in the manual.

Step 2: Remove all stuck paper

Check for pieces of paper or tiny objects under the right side cart. Sometimes stuck bits of paper may also be responsible for the Epson printer error code 0x60 or 60H. Open the printer carefully and clean it thoroughly. Be sure to remove smaller pieces to eliminate the risk of paper misfeeds.

Step 3: Delete the recently installed programs.

Go to the control panel and click on the "Uninstall a program" option. Now, right click on the software you want to remove or uninstall, then click on the "Uninstall" option.

Step 4: Check and download the latest updates

Locate and click the "Start" button and type the Windows update message in the search box. After typing, click on "check for update" option. Now find the latest updates and download it.

Step 5:  Run a tool

You must use and run a tool that can perform a deep scan process and restore damaged Windows system files. Here, all you have to do is click on the "Start" button and then type the "CMD" command in the search box that you will find below. Now, right-click on "CMD" to run the administrator account. In the Command Prompt section, type "sfc / scannow" and then press the "ENTER" button to continue.

Step 6: Log in to Safe Mode

Using a networking tool, check whether the error persists in Windows. Click the "Start" button and type MSCONFIG. Tap the "Boot" icon in the pop-up dialog box, and then click the Safe Boot icon in the Boot section. After that, click on "Network and reboot the computer" and finish the process.

Bitnami