Epson Error Code 0xe5 can arise in your Epson printer due to several reasons. The most common reasons are virus or malware attacks, printer driver software failure, improper printer installation, and hardware failure. A paper jam, an error on the coding tape, etc. are also responsible for the appearance of this error code on your printer. As soon as this error code appears on your Epson printer, the device starts to run slowly, hangs too often, and so on. The print quality of your Epson printer also decreases and the connected computer system crashes frequently.
The discovery of such symptoms during a large print session should be quite boring. You might consider using a local service provider to get rid of the Epson Error Code 0xe5. Never make the mistake of hiring local printer experts as they will further damage your Epson printer. Read on to get a clear idea of the different methods for quickly resolving this error code.
Check out all the factors which are usually responsible for causing this error.
- Discover all the factors generally responsible for this error.
- If malicious software affects your computer, it may slow down your PC and display this error.
- Another important cause of the EPSON error code 0xe5 is a failure of the encoder or the engine driver.
- The problem is often caused by the lack of proper connection of the computer with the printer.
- In the case of a wireless printer, the computer may not recognize the printer and display this error.
- There may be a problem with the blue band of the ink cartridge holder.
- The Epson error code 0xe5 may occur due to a printer driver software failure.
- Moreover, the printhead of your printer may be in bad condition. If not, then a paper jam can cause this issue.
- This error can develop due to an overloaded carriage of the printer.
- Empty or faulty cartridges are other possible reasons behind this error.
Since your primary concern is to make your printer error-free, let us talk about the ways to fix Epson error code 0xe5.
Method 1: Scan your Computer
You must scan your computer for malware. If the scan detects a malicious program, use an anti-malware to remove it from your PC. After that, unplug your computer and disconnect it from the printer. After a few minutes, reset the computer and reconnect it to the printer. Now turn on the printer and perform a test print to make sure it has resolved the problem.
Method 2: Reset the Printer
To check whether your PC can recognize a wireless printer, establish the connection. If your computer can identify the printer, the error code Epson 0xe5 will no longer appear. If you still have problems with this error, your printer may have other problems. So check out the other methods.
Method 3: Inspect the Printer
Check the print head and replace it if it is in poor condition. Reset the print belt if it is not correctly installed in the printer. Make sure the blue stripe of the tape is holding the ink cartridge holder correctly. Check that the carriage containing the cartridges in the printer is not overloaded.
Method 4: Check the Cartridges
Open the cartridge cover to check the ink level. If they run out of ink, fill or replace them. If this does not correct the error code for the Epson 0xe5 printer, your printer may be damaged or malfunctioning due to incompatible cartridges. In this case, you have no option but to replace the cartridges. Buy the cartridges from a reliable supplier.
Otherwise, it may further damage your printer. These are basic solutions that you can apply to correct this error. However, you must use a software expert to correct a printer driver, CR encoder, or engine driver failure.