Whenever you get this Epson error code 0xfa, many start wondering about the actual causes. This can disrupt the entire print job and cause a printhead that does not respond. This will also prevent the printer from reading any input file during initialization mode. It is important to know the real reasons before applying any troubleshooting method. So let’s look at some of the reasons for oxfa error in Epson printers.
- If there is a paper jam problem in the printing machine, you may get this error when printing.
- Sometimes, the reason may be a critical hardware issue that may be causing this 0xfa error code. So, if there is a technical fault in the circuit board or in the paper feed path, this problem may occur.
- If material damage occurs in the Epson printer’s gear, roller, motor, or sensor units, an 0xfa error may occur.
- Users who use Linux devices to connect their printers may experience this problem after printing a few pages. The reason may be due to operating system issues that are incompatible with the Epson printer.
- Another reason for getting this printer error is due to corrupted registry files on the connected device.
- Methode 1: Reset the printer:
In order to eliminate the error code 0xfa, you must clean or reset the printer. To do this, you can start opening the printer components carefully. If there is a paper jam, you will also learn to know. Remove the printed documents. After that, reinsert the printer parts. Make sure that before you do it, you have turned off your printer.
- Method 2: Update or reinstall the printer driver:
Due to a faulty driver, the printer stops working properly. In this case, you must update the printer driver. You can use a driver update tool to automatically update the driver. On the other hand, you can also update your driver manually. Before you start updating the driver, make sure you have the latest version of the driver. In any case, if you have the driver updated and still get the error message, you’d better reinstall it.
- Method 3: Deep scanning process:
Your system is still vulnerable to malware attacks. That’s why you need to download an antivirus tool and perform an in-depth analysis process.
If the problem persists, it may be caused by an internal hardware failure. In such cases, you should avoid fixing the problem yourself, especially when you are not tech savvy. This is because repairing a hardware failure without the help of an expert can result in decreased usability of the printer.