Error 0x80300024 on Windows 10
You probably found this article because you were looking for instructions on how to troubleshoot the Windows 10 0x80300024 installation error. First of all, know that you are not alone in dealing with this problem. Other users have encountered the same problem while attempting to install the Windows operating system. This error is usually accompanied by a message providing details of the problem.
Now, you might ask, "Why is the error message" Windows can not install to the selected location "is displayed?" This problem occurs for several reasons. You have probably inserted your USB stick in the wrong port or you are using another key. In other cases, the error is displayed when there is insufficient free space on your disk or when your hard disk is corrupted. Whatever the cause of the problem, we are here to teach you how to fix error 0x80300024 when installing Windows. In this article we will share some solutions that will help solve the problem.
Solution 1: Disconnect Unnecessary Hard Drives
Perhaps you are using more than one hard drive and one of them is destined to become the destination of the installation. If this is the case, it is possible that the error 0x80300024 appears on your screen during the installation of the Windows operating system. What happens is that the additional drive conflicts with the destination drive during the installation process. As such, our first tip is to remove the other hard drive from your computer. After that, try to install the operating system again. You can reconnect the additional drive once you have installed Windows successfully.
Solution 2: Check if You’re Using the Right USB Port
If you are installing the Windows operating system via a USB flash drive, you can use this solution to fix error 80300024. You may have connected the USB drive to the wrong port. As such, we suggest you disconnect the flash drive and then try to insert it into other ports.
Solution 3: Setting the Hard Drive as the Primary Boot Disc
It is also possible that the destination drive for Windows installation is not set as the primary boot disk. This is why error 0x80300024 is displayed. To remove this error, you can adjust the order of the disks in your computer's BIOS at startup. Follow the steps below:
- Boot your PC.
- Now you need to access the BIOS setup of your computer. You may need to press the F1, F2 or Del key to do this. However, the key to accessing the BIOS screen varies depending on the brand of your PC. It is therefore preferable that you consult your manual to know which button to press.
- Once you have accessed the BIOS setup, search for the boot configuration of your PC.
- Make sure your hard disk is set as the first option in the boot sequence.
- Save the changes you made, and exit the BIOS.
- Try to install the Windows operating system again and check if the error is gone.
Solution 4: Freeing Up Space
As mentioned, it is possible that error 0x80300024 occurred because the destination drive is already full of data. As a result, the drive does not have enough space to hold the installation files. In this case, it is advisable to format the hard disk to remove the error 0x80300024. Here are the steps:
- Plug / insert the installation media, and then restart your computer. Make sure to select the appropriate option to boot your PC from the installation media.
- Choose your preferred language and accept the terms of the license agreement.
- Select Custom.
- Click Drive Options to format the destination drive. Choose the correct partition, and then click Delete.
- Click Next to restart the installation process.
Solution 5: Replacing your Hard Drive
If you have tried all the solutions we have provided but none of them has fixed the error 0x80300024, it may be time to consider getting a new hard drive. The one installed on your PC may be defective, which may cause problems during the Windows installation process.