Quick Heal Error Id 1004

Why Quick Heal Error Id 1004 occurs?

Quick Heal Error Id 1004

[breadcrumb_simple]

Why Quick Heal Error Id 1004 occurs?

This 1004 full Quick Heal Error Id 1004 occurs if there are corrupted files in the antivirus software package. In addition, if your update is interrupted abruptly or if your system shuts down, this error code may appear. The easiest way to resolve the 1004 update error is to run a disk check using the command prompt. It’s a pretty technical solution and you may not be able to do it yourself.Why Quick Heal Error Id 1004 occurs

Symptoms: You may experience error updating 1004 with the following symptoms

  • Whenever we perform an online update, error message 1004 is displayed.
  • The same problem occurs even if you try to update Quick Heal using the downloaded offline update program.

There are different reasons why this corruption occurs, as below

  1. The system rebooted sharply during the Quick Heal update process.
  2. The update process stopped abruptly during the update.
  3. The system has gone through auto repair / restore.
  4. Bad block / error on the hard disk.

How to repair Quick heal update Error id 1004?

You must first repair any errors on the hard disk before proceeding to step number. Follow the steps below to correct the error

Method 1:  If you are using the Windows XP / Vista / 7 operating system:

  1. Click Start-> All Programs-> Accessories-> Right-click Command Prompt-> Click Run as Administrator. You will get a command prompt window.
  2. Type CHKDSK, and then press the Enter key. Once the disk check is complete, the result of the check will be displayed. Check for a bad sector / file system error.
  3. If an error or bad sectors are found, we can remedy the error by giving the command CHKDSK / F / R Press ‘Y’ and reboot your system to correct the errors.

Method 2: If you are using the Windows 8/10 operating system

  1. Press Windows + ‘X’ keys at the same time> Select Command Prompt (Admin). ·You will get a command prompt window. Type CHKDSK, and then press the Enter key. Once the disk check is complete, the result of the check will be displayed. Check for a bad sector / file system error. ·
  2. If an error or bad sectors are found, we can remedy the error by giving the command CHKDSK / F / R Press ‘Y’ and reboot your system to correct the errors.
  3. After correcting the error on the disk by performing step 1, press the Windows key + ‘R’ to open the RUN dialog box, type quickup.exe / rollback, click OK and wait a moment.
  4. Now try updating Quick Heal and checking the reported problem.
  5. If the same problem is observed with the steps above, reinstall Quick Heal Antivirus with the latest version of Quick Heal.

Once these steps are completed, users may not be facing error 1004 of their antivirus. But if the problem persists, then take the essential technical assistance to help you recover completely. Users can get an essential technical solution thanks to the Quick heal Antivirus chat support.

westerntechiesus
Western_Techies
western-techies
westerntechiesinfo