[breadcrumb_simple]
What is Vpn Error 733 ?
Vpn Error 733 is the reference message of the error caused. This is an error format commonly used by Windows and other Windows-compatible software and driver vendors.
This code is used by the provider to identify the error caused. This error code Vpn Error 733 may have a numerical error number and a technical description. In some cases, the error may have more parameters in Vpn Error 733 format. This additional hexadecimal code corresponds to the address of the memory locations where the instruction (s) were loaded at the time of the error.
What causes VPN Error 733 ?
There can be many reasons for these types of problems, including damage to system files. Corrupted system file entries can pose a real threat to the well-being of your computer.
System file errors can occur in several ways. Incomplete installation or uninstallation, inappropriate removal of applications or hardware. This can also be caused by recovering your computer after a virus attack, adware / spyware or an improper shutdown of the computer. All of the above assets may result in the removal or corruption of entries in Windows system files. This corrupted system file will result in missing and incorrectly linked information and the files necessary for the proper functioning of the application.
How to Fix Vpn Error 733 ?
- On the client disable the “Negotiate multi-link for single link connections” setting. To do this:
- Start > Settings > Control Panel
- Open “Network and dial-up Connections”
- Right click the VPN network connection giving the problem and select “Properties”
- On the “Networking” tab, click “Settings”
- Clear the check-box “Negotiate multi-link for single link connections”
- If the server is connected to the internet via a router then it may be that the router does not support VPN connections. Ask the server administrator to check that:
- The router supports “VPN pass-through” (be aware that different routers may use different terms). Other terms that are normally associated with this are: “IPSec” and “L2TP”.
- The router is configured to pass through VPN connections to the necessary server.
NOTE: It is not sufficient to simply forward ports 1723 and 47. Port 1723 needs to be forwarded, but what needs to be forwarded is IP Protocol 47 (GRE) not port 47. This is normally done via an explicit setting on the router. If the router does not appear to support this then investigate whether a bios upgrade is available for the router.
- Check that the server and client agree about who is assigning or specifying TCP/IP addresses. (It is common to allow the server to specify the TCP/IP address.)
- On the VPN server, make sure there are available IP addresses to allocate. The default setting for incoming TCP / IP is “(o) Automatically assign TCP / IP addresses via DHCP”. However, if there is no DHCP server on the machine, select “(o) Specify TCP / IP Addresses” and enter an appropriate name. interval.
- Check that the network protocol you are using (usually TCP / IP but can be NetBEUI) is also listed on the server side.