Windows 10 Error 31

Windows 10 Error 31

Windows 10 Error 31


The error code 31 of the network adapter in Windows 10 is one of many error codes in the Device Manager. “This device is not working properly because Windows can not load the required drivers for this device (Windows 10 Error 31)”. If you also encounter error code 31 on the Ethernet card, do not be frustrated. It’s not difficult to solve. Here are 2-3 troubleshooting methods that you can follow.

Solutions to Fix Windows 10 Error 31

Solution 1: Update the Network Adapter Driver

In a large sense, this network card can not be loaded by Windows 10 error can be a driver problem. This is because of the missing network driver, or because your network adapter driver is out of date or incompatible with Windows 10; the device was not loaded.

On this occasion, you’d better start downloading the latest network driver from your computer to see if it works.

Using Driver Doctor to update the network adapter can be a good choice.

  1. Download and install Driver Doctor on Windows 10.
  2. Click Scan Now.

It is to allow Driver Doctor to search for your computer with the corrupted or in-congruent drivers on Windows 10.

Windows 10 Error 31

  1. Hit Get Drivers.
  2. Click Download All.

Here you can choose to download only the network to solve the 32 error code in device manager.

  1. Install drivers on your PC. Just follow the on-screen instructions and you can get the network drivers easily.

With the updated network adapter driver, you are qualified to make the error code 31 away from your PC.

Solution 2: Delete Values in Registry Editor

Sometimes the network value in the registry editor may be corrupted, resulting in a code error 31. In this case, you can also delete these keys in order to manage the network card can not load error on Windows 10.

  1. Press WindowsR to open the Run box.
  2. In the box, type in regeidt and click OK to get into Registry Editor.
  3. In Registry Editor, go as the path:


Windows 10 Error 31

  1. Under Network, navigate to the right pane, and right click the key to Delete it.

Windows 10 Error 31

  1. Restart your computer.

When you restart your PC, you will notice that error code 31 indicating that Windows 10 can not load the driver for this device would be resolved.
 Solution 3: Restore System
Before you take this last action, you must first check the hardware status and make sure that it is not the network device that is causing the Code 31 Device Manager issue under Windows 10. After that, if the network is still not operational, you may need to restore Windows 10 until code error 31 disappears from your PC.

In short, this publication can correct error 31 in the Device Manager code unless you need to replace a new network, wireless, or Ethernet device.